ASIC and FPGA

Make it to the Right and Larger Audience

Get no sim result from using synopsys coreConsultant

Get no sim result from using synopsys coreConsultant

1 Voices |1 Posts |300+ | Discussion Rooom: ASIC and FPGA

This topic contains 0 replies, has 1 voice, and was last updated by bryanZh 4 years, 5 months ago.

Author

Posts
27/07/2016 05:07

bryanZh
engineer

Try to use Synopsys conConsultant. Get sim env configured in GUI and kick it off. Sim is done pretty quick but no sim result and no report either. Any idea? Below is the script.

%cd (workspace)/sim
%./run.scr
./compile_vip.pl > compile_vip.log
calling dw_vip_setup to refresh headers in ../scratch
/bin/sh: compile_vip.pl: command not found
make: *** [customSetup] Error127
%
Author

Posts

You must be logged in to reply to this topic.

Contact Us

Thanks for helping us better serve the community. You can make a suggestion, report a bug, a misconduct, or any other issue. We'll get back to you using your private message ASAP.

©2021 ValPont.com